LS-30000D (G4J605)
LS-30000D (G4J605)
- Dual welding wire feeding, higher weld deposition rate, accommodates wider welding gaps
- Low training requirement, much easier to master compared to manual MIG & TIG
- Delivers exceptional welding results at up to 10x faster rate than manual TIG welding
- Minimal spatter, porosity, undercut, or distortion; little need for post-weld cleaning or rework
- Color touch screen control panel with intuitive interface and comprehensive job parameter settings
3-in-1 handheld fiber laser machine
Being a turnkey solution for fast sheet metal fabrication, this system
combines laser welding, cutting and cleaning into one system. On
top of its versatility, this 3-in-1 system also possesses the same
characteristics in efficiency and in ease-of-use as the other 2
types of machines.
| Input power supply | 3PH AC380 V±5%/50 Hz |
|---|---|
| Input power | 13.5 kw |
| Center wave length | 1080±10 nm |
| Electro-optical conversion efficiency | ≥30% |
| Laser power | 3000 W |
| Fiber cable length | 12 m (8～9 m exterior) |
| Welding wire diameter | 0.8/1.0/1.2/1.6/2 mm |
| Welding gap range | ≤Welding wire diameter |
| Shielding gas | Argon/nitrogen |
| Shielding gas pressure | Welding ＞3 bar |
| Welding thickness | 0.5～10 mm |
| Penetration | 5.5 mm |
| Scan width | 0～5 mm |
| Recommended cutting thickness | 8 mm |
| Max cutting thickness | 10 mm |
| Cooling method | Water cool |
| Water tank capacity | 13 L |
| Operating temperature | -10°C～40°C; antifreeze needed when ≤7°C |
| Operating humidity | ≤70% at 40°C; ≤90% at 20°C |
|---|---|
| Power source weight | 149 kg |
| Packed weight | 187.5 kg (only source, separate shipment) |
| Package weight of wire feeder and accessories | 33 kg |
| Power source dimensions | 1110 x 530 x 1060 mm |
| Package dimensions | 1220 x 620 x 1135 mm (only source, separate shipment) |
| Package dimensions of wire feeder and accessories | 665 x 335 x 980 mm |
Contact info
