SS 4710 Eye Washer Udyogi
SS 4710 Eye Washer Udyogi
| Pipe | SS 304 pipe. | |
| Valve | SS stay open ball valve with push plate. | |
| Bowl | Receptor bowl made of SS and highly resistant to acid, alkali and oil among others. | |
| Automiser heads | Twin soft flow automiser head which has aerators to control the stream straightness and diameter, thus reducing splash by aerating the stream. It also controls to save water and reduce energy costs. The twin flow has cover which protects from dust and opens with water pressure. | |
| Activation | Push plate and foot paddle. | |
| Water inlet and drain | 1/2 inches BSP inlet and 1¼ inches BSP drain. | |
| Standard | IS: 10592:1982. | |
Contact info
FAQ
Once an eyewash station has been activated it cannot be turned off. The eyewash solution will flow until the cartridges or reservoir have been emptied.
Immediately flush eyes for at least 15 minutes. Keep the eyes open and rotate the eyeballs in all directions to remove contamination from around the eyes. An injured person may need help holding the eyelids open.
The eyewash should be turned on to full strength. Allow the water to run long enough to ensure the flowing water is clear and free of debris. After water is clear, continue to run the water at full strength for an additional 30-60 seconds. Deactivate the eyewash.
