Plasma CUT 100(L 221)
×

Product Inquiry

SKU: N/A Categories:

1. Independent air duct design enhances reliability

2. Optimized HF and pilot arc circuit lengthens service life

3. High arc-starting success rate

4. Digital control technology improves performance

5. Correct level of design margin, meets auto cutting

1. Higher no-load voltage

2. Digital control technology, fast dynamic response

3. The innovative high frequency pilot arc control technology ensures the machine could normal striking arc in low voltage 340V input.

4. Support cutting through contact arc striking by using the contact arc cutting gun directly.

5. Quality cutting thickness 25mm(cutting speed 500mm/min); Max cutting thickness 40mm(cutting speed 150mm/min

Contact Form
img-fluid
Contact info

Phone number

+91 9879156589

+91 7016361870

Address info

Adinath Equipments Private Limited FF, 11-12-13, Dinubhai Estate, Near Annapoorna Restaurant, Trikampura Patia, Vatva GIDC Vatwa, Ahmedabad - 382445, Gujarat, India

FAQ

Plasma CUT 100 (L 221) is a type of plasma cutter used for cutting various metals such as steel, stainless steel, copper, and aluminum. It uses compressed air to generate a plasma arc that melts and cuts the metal.

Plasma CUT 100 (L 221) can cut metal up to a thickness of 25 mm (0.98 inches), depending on the type of metal being cut.

The maximum cutting speed of Plasma CUT 100 (L 221) is approximately 10 meters per minute (32.8 feet per minute).